Talk to our experts and we can help you meet all your product requirements from the beginning. Let us help you with your next project.
English
English
JX-T-8 is a single-walled carbon nanotube powder used as a conductive agent in lithium-ion batteries. It can be used in high nickel ternary systems or silicon carbon negative electrodes with very little addition. It has good conductivity, improving battery conductivity, rate performance, and cycling performance. The product has good dispersion, moderate viscosity, and good processing performance.
Working Mechanism
Has excellent mechanical and electrochemical properties. Larger diameter, higher number of carbon nanotubes per unit, denser linear contact with the positive electrode material or silicon carbon negative electrode material, uniformly coating the surface of the silicon carbon negative electrode to suppress silicon expansion. A very small amount of addition can form a developed conductive network, providing more channels for electron transfer, significantly reducing impedance, improving overall conductivity and rate performance, which is 1/5-1/10 of the conventional carbon nanotube phase addition amount.
Technical Specifications
| Technical Specifications of Carbon Nanotube Powder JX-T-8 | ||
| physical property | Unit | Numerical value |
| Average pipe diameter | nm | 1-2 |
| Pipe Chief | μm | ≥8 |
| Purity | % | ≥99 |
| Ash content | % | ≤1 |
| BET | m2/g | ≥800 |
| Compaction density | g/cm3 | ≥0.01 |
| Moisture content | % | <0.5 |
| G/D | \ | ≥50 |
Product Advantages
1. Better tendency, high G/D ratio, and good conductivity;
2. Low impurity content, high single-walled ratio, and large aspect ratio;
3. The powder is easy to disperse, with moderate viscosity and high processing efficiency.
Related Products
JX-C01 is a furnace conductive carbon black, which has good dispersion and conductivity after surface treatment
WL-1175 is a volatile type anode anti cracking agent that reduces the surface tension of the slurry and optimizes the kinetics of water evaporation during the drying process of electrode.
JX-C02 is an acetylene cracking conductive carbon black, with high oil absorption value, and after surface treatment has good dispersion and conductivity
WL-2010 is a negative electrode dispersant with a small amount of addition, which can improve the viscosity and stability of the negative electrode slurry, increase the solid content of the slurry, and improve processing performance.
WL-3000 is a polymer elastomer lotion. The flexible chain segment on the polymer can inhibit the cracking caused by the internal stress between the particles and the binder during drying.
Let our team help you select the right product
Talk to our experts and we can help you meet all your product requirements from the beginning. Let us help you with your next project.
Request a Quote